What’s New in the Android version SEC-E9?
- Industrial-grade dedicated display screen, longer lifetime, 12 months warranty
- Android system runs smoothly and able to shut off automatical system upgrade
- One-button start, Faster boot speed
- No lithium battery-less issues with battery and safer operation
- The USB connection, more stable signal transmission
- Embedded display screen, NO worries stolen
- Massive key data, Simpler key cutting
- Simpler interface, Clear layer distribution, Easy to use
What’s New About The SEC-E9 Software Features?
- Support to cut a new key when the original key is lost
- Can directly cut a key by key code
- Support to cut various types of keys, including vertical, flat, internal and external milling
- Automatic key measurement
- Support to cut automobile keys, dimple keys, tubular keys, and single-sided domestic keys
- Upgrade by wifi and USB
- Lifelong free software upgrades, almost 2-4 times per year.
What’s New About The SEC-E9 Hardware Features?
- Equipped with both decoder and cutter. Decoding and cutting can be done at one time;
- Spindle driven by two spindle belts; High power 27W DC motor with 24V DC
- Ball screw to drive Z axis makes cutting powerful and in high precision;
- Cross roller guided XY axis makes the machine more stable and accurate;
- One automobile key clamp supports to cut both standard keys and laser keys;
- The replaceable clamp can be changed according to the key types;
- Wide and bright LED light brings easy operation at night;
- Lightweight, small size, portable for mobile, easy to work outside
- The power adaptor for SEC-E9 should be 24V and 5A
- Certificate: Ce SGS FCC
- Voltage: DC24V/5A
- Power 120W
- Warranty: 12 Month Manufacturers
- Weight: 19.5kg
- Size: 255(W)*360(H)*340(D)mm
- Resolution: Xy Axis: 0.005mm, Z Axis: 0.0015mm
- Spindle Speed 12000+rpm
- Working Temperature Range 0-40°
- Working Humidity Range 10-90%
One Button Turn On/Off – Just hit the red button
Please kindly note that our machine can not work without the connection of the power plug. Do not open the wifi until asked to do so.
2. Operation video
#Car key clamp
Three situations that you will need to do calibration again:
- When you receive the machine in the first time.
- When you change the key clamp, decoder, and cutter.
- When the machine cannot cut a key correctly.
2.2. high-security key cutting
2.3. regular key cutting
Make sure the key you fix on the key clamp is in the correct position. Standard keys are in the top level of key clamp while laser keys are in the bottom level of the key clamp. Besides, please make sure the key is flatly fixed on the key clamp.
#HU66 Aulixary clamp
3. Cutting Speed and key Location Mode
There are four speeds for your choice: Steel, Nkl-silver, Brass, High Speed. Steel is the lowest while high speed is the fastest. Which speed should be selected mainly depends on key blank material. The hard the key is, the slow speed should be. Usually, we will select Nkl-silver speed for most of the car keys.
4. DO Cleaning often after finishing the key cutting.
Operation Videos On Youtube
1.How to calibrate
2.How to cut a car key on SEC-E9 key cutting machine
3.How to Cut Toyota Car key TOY43
4.How to Cut Honda Car key HON66
5.How to copy a dimple key on SEC-E9 full automatic key cutting machine.
6.How to copy a Ford Tibbe key on SEC E9 key cutting machine
7.How to copy a single side standard key on SEC-E9 full automatic key cutting machine
8.How to copy a tubular key on SEC-E9 full automatic key cutting machine
9.How to cut a new key when the original key is lost(Take HONDA Accord as an example)
Click here for Key Compatibility List Model list